ART 310-A





ART 310-A - Active 2-Way PA Speaker with Astounding Sound!
The RCF ART 310-A is the reference-quality, powered PA speaker we've all been waiting for. We tested RCF ART 310-A powered PA speakers at a live gig. It was the first time we actually had people from the audience come up to us afterward and compliment the sound quality of our PA system! The ART 310-A is perfect for live sound, corporate events, and presentations where high output and excellent sound quality must be met with compact size. With its superb bass punch and precise, linear frequency response, you'll be hard-pressed to find a better active PA speaker than the RCF ART 310-A.


RCF ART 310-A at a Glance:
350-watt active, 2-way, wide dispersion live sound-reinforcement speaker.
Innovative 1.5" Mylar dome compression driver for precise high frequencies.
Lightweight, high-efficiency TAED amplifier and neodymium woofer.
Mic/Line Input with Master Volume Control and XLR out.
Strong, lightweight enclosure with top handle for easy transport.

Active 2-way Speaker
The RCF ART 310-A is an active, wide-dispersion 2-way sound reinforcement speaker. It integrates a high power 350-watt amplifier, a complete electronic processor section, and RCF's low distortion, high power neodymium transducers. The system is unique in its class for output and vocal intelligibility. The new 10" woofer is equipped with high-performance, lightweight Neodymium magnets with a 2.5" voice coil. Specific attention has been paid to magnetic circuit polarization for optimum thermal immunity, which provides advantages in system portability and high-frequency clarity (due to the force of magnetic flux in the gap exceeding 2 kilogauss). All this adds up to the ART 310-A's high output efficiency and controlled bass response.

1.5" Mylar Dome Compression Driver
The compression driver uses a new 1.5" Mylar dome design and optimized geometry radial phase plug. This innovative design is powered by a high-flux neodymium magnet offering a very open and natural midrange sound with extreme precision in high-frequency reproduction. A generous 2-step class H design is used to power the low frequencies and the compression driver amplifier is a warm and clear class AB design.

TAED Amplifier and Neodymium Woofer
Incredibly lightweight, the RCF ART 310-A uses a high-efficiency True Active Extended Dynamic (TAED) amplifier. Quite frankly, it cranks out the most output we've ever heard from 10" active speaker system. The result of nearly ten years at the forefront of active speaker design and manufacture, RCF's True Active Extended Dynamic amplifier technology provides the perfect match of amplifier to transducer. The goal of TAED amplification is to increase the effective dynamic range of the loudspeaker system, which provides improved sonic accuracy, vocal clarity, and increased depth and resolution of the audio signals. RCF is able to achieve this because quite simply, they design and manufacture ALL of the ingredients. RCF's new generation of active amplifier modules are designed with a new Double Wave Limiting System that along with providing improved transducer protection, guarantees the full use of the true dynamic range of the power amplifier. This in turn dramatically reduces distortion levels as well. The result is a powerful, reference-quality sound for your live gigs.

Mic/Line Input with Master Volume Control
The input section features an XLR input connector that is switchable from microphone to line levels. A master volume control and a handy XLR signal output allows extra versatility. The processor section includes an active crossover, system equalization, transducer phase-alignment, limiter, and protection functions. The system is visually monitored via 4 status LEDs.

Strong, Lightweight, Polypropylene Enclosure
The ART 310-A is housed in a rugged, road-worthy, and lightweight polypropylene composite enclosure. The woofer is protected by a strong, powder-coated, metal grille. The cabinet features two M10 threaded fly-points, a 35mm stand adaptor, plus an ergonomically-designed top handle for easy transportation.


RCF ART 310-A Features:
350-watt Monolithic bi-amplification, 300 watt low frequency and 50-watt high frequency power
127 dB max SPL.
Wide dispersion, 90 x 70 low distortion, constant directivity horn.
10" high-power woofer, 64mm in/out aluminium coil.
1" neodymium, high-frequency driver.
Electronic equalization, phase alignment, limiter and protection.
Mic/Line XLR input, XLR signal output.
Comfortable top handle for easy transportation and positioning.
Two M10 fly points and built in pole mount adaptor.

City Pris Kr. stk 5495,-
Sæt pris Kr. 10.000,-

RCF ART 705-AS
15" High Output Active Bandpass Subwoofer




The ART 705-AS is an extremely compact high output active subwoofer system. RCF's Research and Development engineers have developed a totally new 'High Current Capacity' Monolithic amplifier alongside a totally new RCF Precision Series 15" high power woofer.

The ART 705-AS delivers tight, fast controlled bass response at very high efficiency levels. Offering increased dynamic range. The system re-defines audio subwoofer performance standards.

RCF engineers have developed a new High Current 800 watt class H two step ultra efficient topology amplifier to provide the critical performance demanded by True Active Subwoofers. This design delivers high efficiency and generates minimum thermal losses therefore simplifying the cooling system. The reason for ensuring our amplifier can generate very high current operation is to properly maintain complete control of the woofer especially under 'phase shift' conditions.

The ART 705-AS's woofer technology is using new RCF Precision series woofer design parameters. We have utilised high temperature polyimide voice coil assemblies with state of the art curing processes plus advanced magnetic structures and efficient cooling systems. The RCF Precision "Inside/Outside" voice coils assure long term reliability and vastly reduced power compression.

Applications include:
Small to medium-sized Live and Playback
Portable PA Systems for Speech and Multimedia
Mobile DJ
Fixed Installations

The ART 705-AS is designed to compliment all ART Active and Passive models. It can also be used as an "add-on" to any existing active or passive PA Speaker System.

Features:
High current 800 watt class H amplifier
129 dB SPL peak
15" high power woofer, 75mm inside/outside copper coil
Response down to 40 Hz
Selectable crossover and high pass outputs, phase switch
Electronic equalization, limiter and protection
Mono/Stereo combo XLR/Jack input, Mono/Stereo XLR signal output
Baltic birch compact enclosure and 2 side handles for easy transportation
Built in pole mount, two M10 points for optional speaker cart